CASE CX160D Full Size Excavator – NKS7F1764

Key Features:

• Versatile Applications: Ideal for digging, trenching, and pond finishing.
• Ease of Transport & Ownership: Designed for convenience on and off the jobsite.
• CASE ProCare Protection: Ensures peace of mind with comprehensive support.

Enhanced Productivity:

• Faster Cycle Times: Achieves up to 5% improvement with an advanced hydraulic system.
• Control & Customization: Includes standard Free-Swing feature for load control, LED light package for night operations, control pattern selector, and power mode selector.
• Hydraulic System Components:
  • Electronically controlled hydraulic pump
  • Larger control valve
  • Solenoid valve

Fuel Efficiency & Compliance:

• SCR Solution: Allows the engine to run at peak performance while meeting Tier 4 Final emissions standards.
• Maintenance Simplified: No need for a Diesel Particulate Filter, reducing downtime.

Operator Comfort & Visibility:

• Spacious Cab: More entry room and foot space for operator comfort.
• Air-Ride Seat: Equipped with fore/aft sliding, tilt, reclining, adjustable lumbar support, and a heater.
• Adjustable Controls: Armrests and pedals adjust to fit operator preferences.
• In-Cab Amenities:
  • Bluetooth radio
  • Sunlight-responsive climate control system
  • 7″ widescreen color monitor with constant rear camera view

Easy Serviceability:

• Routine Maintenance Made Easy: Features include a standard oil sample port, grouped service points, tilt-out coolers, and auto-locking side panels.
• Safety Enhancements: Additional handrails for improved accessibility.

Precision Technology with OEM-Fit Machine Control:

• Advanced Solutions: Optional OEM-Fit 2D and 3D machine control systems enhance excavation accuracy.
• Expert Installation: Installed and tested by certified CASE precision specialists.
• Investment Value: Increases machine residual and resale value, confirming system compatibility.

Engine & Fuel Economy:

• Engine Model: Isuzu AR-4JJ1X, Tier 4 Final Certified
• Emission Solutions: Includes Selective Catalytic Reduction (SCR), Diesel Oxidation Catalyst (DOC), and Cooled Exhaust Gas Recirculation (CEGR)
• Performance Features: Four-cylinder turbocharged diesel engine with VGT turbocharger, electronic fuel injection, and a high-pressure standard rail system
• Safety and Maintenance: Features neutral safety start, auto-engine warm-up, glow-plug pre-heat, Engine Protection Feature (EPF), and a 500-hour engine oil change interval
• Fuel Efficiency Enhancements: Fuel Economy Assist System (FEA) and no Diesel Particulate Filter (DPF) requirement

Hydraulics:

• Advanced Controls: Auto power boost, auto swing priority, and selectable work modes for optimized performance
• Assistance Systems: Arm speed and boom speed assistance through dual pump flow, bucket curl assist, and Free Swing feature for improved load control
• Maintenance and Safety: Hydraulic oil sample port, SAHR brake, and 5,000-hour hydraulic oil change interval

Upper Structure:

• Visibility and Safety: Equipped with ISO mirrors, viscous cab mounts, upper mounted work light, and swivel guard belly pan
• Accessibility and Security: Features include a handrail for RH access, a lockable fuel cap, and service doors

Operator Environment:

• Comfort and Control: ROPS-protected pressurized cab with a heated high-back cloth seat, air suspension, adjustable armrests, and low-effort joystick controls
• Convenience Features: Includes an LED color monitor, on-board diagnostic system, AM/FM radio with Bluetooth, rear-view camera, and climate control
• Safety Measures: Equipped with an emergency exit, safety glass windows, and an anti-theft system

Attachments:

• Versatile Options: Comes standard with a 16 ft 11 in boom, 8 ft 7 in arm, heavy-duty bucket linkage, and auxiliary pipe brackets
• Enhanced Durability: Features centralized grease fittings, attachment cushion valve, and arm and boom regeneration

Undercarriage:

• Robust Design: 23.6 in triple semi-grouser steel shoes, full overlap turntable bearing tub, and hydraulic track adjustment for stability and durability

Telematics:

• CASE SiteWatch™: Includes hardware and a 3-year Advanced data subscription for comprehensive machine management

Engine Enhancements:

• Refueling Pump: Simplify the process with an added refueling pump, ensuring efficiency and reducing downtime

Advanced Hydraulics:

• Auxiliary Hydraulics Options:
  • Single acting/joystick activated for straightforward hydraulic tools.
  • Double acting/joystick activated with thumb for versatile attachment operation.
  • Multi-function with electronic pressure control for precise control of complex attachments
  • Secondary low-flow for attachments requiring less hydraulic flow
  • Proportional hydraulic controls for fine-tuned operation
• Safety Features: Hose Burst Check Valve (HBCV) to prevent potential injury or damage from hose failure

Attachments for Every Job:

• Long Arm: Extend your reach with a 10 ft 0 in long arm option
• Quick Coupler: Facilitate easy attachment changes with the CASE multi-pin grabber
• Tool Selection: Choose from heavy-duty/extreme-duty/ditching buckets, hammers, thumbs, and compaction plates for diverse job requirements
• Load Holding Control: Enhance safety and control when lifting heavy loads

Upper Structure Protection:

• Rubber Bumper Guard: Protect your machine’s upper structure with a rubber bumper guard available through Service Parts

Undercarriage Customization:

• Steel Shoes: Upgrade to 27.6 in triple semi-grouser steel shoes for enhanced stability and traction
• Track Guides: Add triple track guides for increased track alignment and stability

Operator Environment Enhancements:

• Safety Guards: Equip your cab with FOPS level 2 cab top guard and front grill/rock guards for additional protection
• Vandal Guard: Secure your machine with a vandal guard for the front window
• Visibility Aids: Opt for a rain deflector, sun visor, and side-view camera to enhance operator visibility and comfort
• LED Package: Improve visibility in low-light conditions with a comprehensive LED package including a side view camera and six LED lights

Machine Control Solutions:

• Leica iCON iXE2 – 2D System: Achieve precise grading and excavation with a state-of-the-art 2D system
• Leica iCON iXE3 – 3D System: For complex projects requiring exact dimensions and slopes, the 3D system offers advanced excavation control

Category	Specifications
ENGINE
Model	Isuzu AR-4JJ1X
Emissions	CEGR, SCR, DOC
Emissions Certification	Tier 4 Final
Fuel	Requires ultra-low sulfur fuel, B5 biodiesel tolerant
Type	Water-cooled, 4-cycle, high pressure common rail system, Turbocharger w/ air-cooled intercooler, SCR system
Cylinders	4-cylinder in-line
Displacement	183 in³ (3 L)
Bore/Stroke	3.76 x 4.13 in (95.4 x 104.9 mm)
Fuel Injection	Direct injection – electronic
Fuel Filter	Replaceable, full flow spin-on cartridge
Air Filter	Dry type element w/ warning restriction indicator
Oil Filter	Replaceable, full flow spin-on cartridge
Engine Gradeability	Side-to-side 35°, Fore and aft 35°
Net Horsepower – SAE J1349 @ 2200 RPM	112 hp (83.2 kW)
Gross Horsepower – ISO 14396 @ 2200 RPM	115 hp (86.0 kW)
Net Max. Torque – SAE J1349 @ 1800 RPM	257 lbf·ft (349 N·m)
Cooling Operating Range	109° to -13°F (43° to -25°C)
Oil	Requires low-ash oil CJ-4
DRIVETRAIN
Travel Control	Dual-stage relief/counterbalance design
Brakes	Mechanical disc
Service Brakes	SAHR disc – each motor
Two-Speed Travel	Max. high speed 3.4 mph (5.4 km/h), Max. low speed 1.7 mph (2.8 km/h)
Automatic Downshift	Yes
Drawbar Pull	36,100 lbf (160 kN)
Gradeability	70% – 35° Slope
ELECTRICAL
Voltage	24 Volts
Alternator Rating	50 amp
Batteries	2 x 12 Volt
Battery Reserve Capacity	72 Ah/5 hour
Work Lights	4 (24 Volt/70 watt) – 1 boom, 1 upper, 2 cab
OPERATOR ENVIRONMENT
Air-Conditioner Output	18,100 BTU/hr
Heater Output	20,150 BTU/hr
Sound Level Inside Cab – ISO6395	70 dBA
Electrical Outlet	12 Volt
Cab Interior Light	10 watt
Rear View Camera	Standard
Seat	Heated, air-suspension
ATTACHMENT
Boom	16 ft 11 in (5,150 mm)
Arm Options	8 ft 7 in (2.62 m), 10 ft 0 in (3.05 m)
Bucket Digging Force	25,200 lbf (112 kN) w/ auto power up 26,500 lbf (118 kN)
OPERATING WEIGHT
Operating Weight	38,400 lb (17,400 kg) w/ shoes 2 ft 0 in (600 mm), w/ boom 16 ft 11 in (5,150 mm), w/ arm 8 ft 7 in (2.62 m), w/ bucket 1,067 lb (484 kg), w/ counterweight 6,980 lb (3,170 kg)

Dimension	8 ft 7 in (2.62 m) Arm	10 ft 0 in (3.04 m) Arm
A. Overall Height	9 ft 9 in (2,960 mm)	10 ft 3 in (3,130 mm)
B. Cab Height	9 ft 9 in (2,970 mm)	9 ft 9 in (2,970 mm)
C. Overall Length – With Attachment	27 ft 9 in (8,460 mm)	27 ft 11 in (8,520 mm)
D. Overall Length – Without Attachment	14 ft 6 in (4,430 mm)	14 ft 6 in (4,430 mm)
E. Width of Upper Structure	8 ft 4 in (2,530 mm)	8 ft 4 in (2,530 mm)
F. Track Overall Length	13 ft 1 in (3,990 mm)	13 ft 1 in (3,990 mm)
G. Track Overall Width with 23.6 in Shoes	8 ft 6 in (2,590 mm)	8 ft 6 in (2,590 mm)
H. Track Shoe Width	2 ft 0 in (600 mm)	2 ft 0 in (600 mm)
I. Center to Center – Idler to Sprocket	10 ft 6 in (3,190 mm)	10 ft 6 in (3,190 mm)
J. Upper Structure Ground Clearance	3 ft 4 in (1,020 mm)	3 ft 4 in (1,020 mm)
K. Minimum Ground Clearance	1 ft 5 in (420 mm)	1 ft 5 in (420 mm)
L. Rear Tail Swing Radius	8 ft 1 in (2,470 mm)	8 ft 1 in (2,470 mm)

Base & Extended Warranty Coverage

CASE ProCare applicable on select new heavy machine orders.

See your CASE dealer for model availability and timing.